Metal Ware

Bunsen Burner Meaker Type

  • Meaker burner with stop cock
  • Base made of cast iron, painted,
  • Base appx. Dia 70mm,
  • Total height appx. 180mm,
  • Brass pipe chrome plated 24mm dia,
  • Stop cock all brass chrome plated

 


Additional Information:
  • Item Code: SE2104

Double Flame Bunsen Burner

Description:
  • Bunsen burner double flame with stop cock
  • Base made of cast iron, painted
  • Base appx. dia 70mm
  • Total height appx. 170mm
  • Brass pipe chrome plated 12mm dia
  • Stop cock all brass chrome plated

 

We are looking export inquiries from Kenya, Bangladesh, Dhaka, Nigeria, Myanmar, Pakistan, Bentham, Philippines, Vietnam, Turkey etc.


Additional Information:
  • Item Code: SE2105

Boss Head Brass

Description:
Made of brass moulded, chrome plated.

Sizes are: 12mm & 16mm
(key type screw, plastic round shape screw and pin type screws are available, please specify the screw)                           

Boss Head Aluminum

Description:
Boss head alluminium pressure dai casted powder coated
Key type screw
Plastic round shape screw and pin type screws are available, please specify the screw)

Boss Head

Description:
Boss head made of alluminium
Square type to hold upto 16mm dia rods
Powder coated with m. S. T screw

Boss Head Zinc

DESCRIPTION:
BOSS HEAD IS MADE OF ZINC PRESSURE DAI CASTING. Clamps holdersare designed so that it can hold a rods 5/8" in diameter or smallerin right angle. Clamps holders are available in different finishes like nickle plated, zinc plated or black powder coated. It can be customarized by request.

The alloy clamps holdersare constructed in precision die-casting zinc based alloy. The melting point of this material is 400degree celsius but the material will soften at 250 degree celsius. The maximum recommended safe working temperature for this material is 180 degee celsius. Clamps and bossheads fitted with plastic headed screws are not suitable for the use in sub-zero, radioactive or carbon dioxide environments.

Boss Head Zinc

DESCRIPTION:
Zinc Dai casting with 360 degree rotatable with strong screws, Boss head Powder Coated

Crucible Tong

Description:
Made of stainless steel wire 
size :- 6" , 8" , 10" , 12" , 15" , 18" , 24"

Beaker Tong


Description: 
beaker tong, made of dai pressed stainless steel rod.  

Size : 12" 

Front arms covered with asbastor, silicon rubber

Beaker Tong

Description: 
Beaker tong made of dai pressed stainless steel rod, front made of stainess steel sheet covered with asbastor 

Length 12"

Flask Tong

Description:
Flask tong made of dai pressed stainless steel rod, front made of stainess steel sheet covered with asbastor

Length 12"

Fisher Clamp

Description:
Fisher clamp for two burettes, made of mild steel sheet, with mild steel dai pressed boss head to hold upto 16mm dia rod.

Powder coated

We are Looking Export Inquiries

Fisher Clamp Chrome

Description:
Fisher clamp for two burettes, made of mild steel sheet, with mild steel dai pressed boss head to hold upto 16mm dia rod.

Chrome coated

.We are looking Export Inquiries

Fisher Clamp (New Improved Model)





Description:
New improved double burette clamp with all aluminium casted mounts on rod of 1/4" to 1/2" in diameter, two burettes can be securely held in a vertical position while still allowing full view of the burette scale. Clamp has a smooth enamel finish with rubber finger grippers. ,with mild steel screw chrome plated.

103/04/bd = powder coated
.We are looking Export Inquiries

Fisher Clamp (routine Improved Model)

Description:
Double burette clamp with all aluminium casted mounts on rod of 1/4" to 1/2" in diameter, two burettes can be securely held in a vertical position while still allowing full view of the burette scale. Clamp has a smooth enamel finish with rubber finger grippers.  

Cross Pattern Clamp

Description:
Cross pattern clamp, alluminium dai pressed with mild steel rod chrome plated, screw brass chrome plated. Jaws covered with cork sheet.

Standard rod length 9" dia 0. 3" (7. 7mm)
(rod length are available in 7", 8", & 12" also)

Plastic screw knob type is also available

Cross Pattern Clamp Chrome Plated

Description:
Cross pattern clamp made of brass moulded, chrome plate with brass t screw and mild steel rod chrome plated

Cross Pattern Zinc

Description:
Four prong clamps are designed so that the smaller types will able to hold articles upto 90mm with the larger industrial clamps being capable of holding larger items. Four prong clamp with interlocking jaws allow you to hold objects from 1/8" to 3-1/2" in diameter. It can be used for both burettes and condensers.

The jaws are lined with cork to insure a secure grip. Rod attatched is 8mm in diameter and 150mm long for a good reach during practical. Four prong clamps are available in different finishes like nickle plated, zinc plated or black powder coated. It can be customarized by request. The clamp is actuated by nickle plated pummels and has a nickle plated twin screw.

The alloy clamps are constructed in precision die-casting zinc based alloy. The melting point of this material is 400 degree celsius but the material will soften at 250 degree celsius. The maximum recommended safe working temperature for this material is 180 degee celsius. Clamps and bossheads fitted with plastic headed screws are not suitable for the use in sub-zero, radioactive or carbon dioxide environments.

Three Prong Clamp

Description:
Three prong clamp made of brass moulded with mild steel rod chrome plated, screw brass chrome plated. Jaws covered with rubber type

Standard rod length 9" dia 0. 3" (7. 7mm)
(rod length are available in 7", 8", & 12" also) 

Plastic screw knob type is also available

Three Prong Clamp Zinc

Description:
Zinc three prong clamps are designed so that the smaller types will able to hold articles upto 90mm with the larger industrial clamps being capable of holding larger items. Three prong clamps with interlocking jaws allow you to hold objects from 1/8" to 3-1/2" in diameter. It can be used for both burettes and condensers. The jaws are lined with? ? ? Silicon sleeve? ? ? To insure a secure grip. Rod attached is 10mm in diameter and 150mm long for a good reach during practical. It can be customarized by request. The clamp is actuated by nickle plated pummels and has a nickle plated twin screw.

The alloy clamps are constructed in precision die-casting? ? ? Zinc based alloy. Clamps and boss heads fitted with plastic headed screws are not suitable for the use in? ? ? Sub-zero, radioactive or carbon dioxide environments.

Three Prong Clamp with Boss Head

DESCRIPTION:
With attached boss head Zinc Dai Casting with strong thumb screws, Nickel Plating

Universal Clamp

Description:
Dai casting with boss head

Pendulum Clamp

Description:
with boss head

Universal Clamp

Description: universal clamp, aluminum moulded with mild steel rod chrome plated, screw brass chrome plated. Jaws covered with cork sheet.

Standard rod length 9" dia 0. 3" (7. 7mm).
(rod length are available in 7", 8", & 12" also)

Plastic screw knob type is also available.

Condenser Clamp

Description:
condenser clamp, alluminium moulded with mild steel rod chrome plated, screw brass chrome plated. Jaws covered with cork sheet 

Standard rod length 9" dia 0. 3" (7. 7mm)
(rod length are available in 7", 8", & 12" also)

Plastic screw knob type is also available

Three Prong Large Clamp

Description:
Jumboo three prong clamp hold upto 125mm dia made of alluminium, powder coated, rod chrome plated, screw brass chrome plated,

Jaws covered with rubber tube

Rod length 12"

Three Prong Large Clamp

Description:
three prong clamp alluminium die casting with powder coating with mild steel chrome plated rod

Retort Sand Cast Iron

DESCRIPTION: We are Looking Export Inquiries
RETORT STAND MADE OF CAST IRON WITH POWDER COATED
CAT. NO. BASE SIZE ROD SIZE
se101/01 6x4" 18"x3/8"
SE101/02 7x5" 24"x3/8"
SE101/03 8x5" 24"x3/8"
SE101/04 8x5" 24"x12mm
SE101/05 9x6" 30"x12mm
SE101/05 12x7" 36"x12mm

Retort Stand M.S. Levelling

Description:
Retort stand made of mild steel sheet with levelling screw, with non rusting nylon feet.
One foot is on a screw for covenient levelling of the base on uneven surfaces.

Base thickness are : 3mm and 4mm
(please specify the thickness before placing order) We are Looking Export Inquiries

3mm base thickness
CAT. NO.BASE SIZEROD SIZE
SE101/016x4"18"x3/8"
SE101/027x5"24"x3/8"
SE101/037x5"24"x12mm
SE101/048x5"24"x3/8"
SE101/058x5"24"x12mm
SE101/069x6"30"x12mm


4mm base thickness
CAT. NO.BASE SIZEROD SIZE
SE101/076x4"18"x3/8"
SE101/087x5"24"x3/8"
SE101/108x5"24"x3/8"
SE101/118x5"24"x12mm
SE101/129"x6"30"x12mm

Retort Stand M.S. Bend

Description: We are Looking Export Inquiries
retort stand made of mild steel sheet, bend type powder coated
CAT. NO. BASE SIZE ROD SIZE
SE99/01 7x5" 24"x3/8"
SE99/02 8x5" 24"x3/8"
SE99/03 8x5" 24"x12mm

Retort Stand Cast Iron

Description:
retort stand made of cast iron, with side rubber feet, powder coated We are Looking Export Inquiries
CAT. NO. BASE SIZE ROD SIZE
SE100/01 160x100mm 450mm LTH X 9mm DIA
SE100/02 200x125mm 600MM LTH x 9mm OR 12mm DIA
SE100/03 250x150mm 750MM LENGTH x 12MM DIA

Spatula Spoon

Description:
spatula one end spoon and one end flat, made of stainless steel sheet dai pressed, size 5" , 6" , 8" , 10" , 12 "


We are Looking Export Inquiries

Spatula Flat

Description:
Spatula both end flat, made of stainless steel sheet dai pressed.
Size 5" , 6" , 8" , 10" , 12 "


We are Looking Export Inquiries

Spatula Micro

Micro spatula (wire type) made of stainless steel wire dai pressed (spoon type )
Size 6" , 8 " , 10" , 12 "


.We are looking Export Inquiries

Ointment Spatula

Description:
S. S. With wooden handle

.We are looking Export Inquiries

Retort Ring

Description:
retort ring made of mild steel rod, powder coated with t screw

.We are looking Export Inquiries

Retort Ring Improved

Description:
Retort ring made of mild steel rod with pressure dai casting boss head with mild steel screw



We are Looking Export Inquiries

Gas Tap

Description:
Gas tap, made of brass chrome plated with stop cock and one spare nosel


We are Looking Export Inquiries
Looking for Metal Ware ?
© Simtronics Analytical & Laboratory Instruments
 
Desktop Site Back to top